Search Results

The author confines his discussion to engines used on pleasure cars, inasmuch as practically all commercial vehicles use the four-cylinder type. The performance expected of their cars by automobile owners is outlined, particularly as regards performance, durability and maintenance cost. In-asmuch as the horsepower required is often determined by the acceleration demanded, the argument in favor of four-cylinder engines is based mainly on a comparison of its acceleration performance with those of engines having a larger number of cylinders. A number of acceleration curves are given for these engines. The paper next considers smoothness of operation at low, medium and high running speeds, asserting that the decrease in inertia forces due to lighter reciprocating parts has made it possible to increase the speed and thus reduce remarkably the vibration of the four-cylinder engine.

The author describes a number of detailed developments that took place during the working out of a line of worm-driven trucks. The details of front axle and steering parts are dealt with at length, the reasons for the final constructions being clearly explained and the constructions themselves well illustrated. Details concerning difficulty with the Hotchkiss type of drive on heavy trucks, troubles with drive-shafts and lubrication of the worm wheel are all covered thoroughly; spring-shackle construction and lubrication, radiator and hood mounting come in for detailed attention and the question of governors is interestingly covered. Brief reference is made to the influence of unsprung weight, the differences between truck and pleasure car practice in this respect being pointed out.

Inasmuch as horses cannot meet the demand for increased farm power, the tractor must come at once. So far the supply of tractors has been entirely inadequate to meet the demand. The author specifiies some of the problems that confront designers of farm tractors. To make the tractor immediately available for farm work, it must be adaptable to practically all of the existing types of horse-drawn implements, besides furnishing belt power for a wide variety of present power-driven farm machinery. In designing tractors it must be remembered that the horse is a very flexible unit, capable of a wide variation in power output. Designing a tractor to furnish the necessary power for the majority of farm conditions, requires an intimate knowledge of crops, soils and farm management. These must be analyzed carefully so as to make the machine have as wide a range of usefulness as possible.

The author outlines the constructions that have performed cially that four-cylinder engines carried under a hood are the most satisfactory. The defects revealed by war service are given in considerable detail, the author finding that all of the trucks used had developed some weak point. Radiators and springs are specified as a general source of trouble. The author outlines a number of operating troubles developed under the existing conditions of operation and gives examples of the way these have been remedied. Considerable attention is paid to the methods of operating trucks away from made roads. The methods of fitting chains to the wheels, and the use of caterpillar attachments are described. Dimensions are given for bodies and a number of suggestions made as to their proper construction.

The results are given of laboratory investigations made of a number of different types of carbureters, showing the relation between their gasoline and air consumptions over a wide range. This relation is plotted on so-called quality diagrams, on which is indicated the range between which high power and high efficiency can be expected. A description is given of a carbureter arranged in two stages, the first being used at light load and the second coming into action when the throttle is nearly open, thereby more than doubling the carbureter capacity. Engine performance curves are presented showing the result when only one or both stages of this carbureter are used.

This paper is mainly an argument in favor of the use of large, single rear wheel truck tires instead of smaller dual tires. Although the practice of using large singles is comparatively new, the author gives the results of experience and research to show the advantages of the newer method of rear tire equipment. In developing his arguments in favor of single tires, the author goes into the history of dual tire application to show why it was necessary to use two tires in the earlier days of truck operation. As the necessity for increased carrying-capacity grew, tire manufacturers found the then existing single tire equipment inadequate, and they set about to develop suitable equipment to meet the new condition, the result being dual practice. The method of attaching the earlier dual tires is shown to have been poor, resulting in circumferential creeping of the whole tire to a much greater extent as the width of the dual equipment increased.

The authors first define the elementary conditions governing combustion efficiency, dividing these conditions into three main classes. They next compare engines operating on constant volume, constant temperature and constant pressure cycles, dealing specifically with the Otto, Diesel and semi-Diesel types. The main part of the paper is devoted to an outline of the constant pressure cycle, analyzing its advantages as compared with the merits of the constant volume cycle now used in internal-combustion engines. The paper is concluded with a detail description of a proposed constant pressure engine.

The author outlines the factors leading to the present high cost of automobile fuel, states that the introduction of new distillation processes will not solve the problem, but that the development of kerosene-utilizing appliances will produce results satisfactory to everybody. It is stated why kerosene cannot be used on the present gasoline cars. The adaptation of the gasoline automobile engine to the use of heavier fuels than will vaporize without the use of heat is entirely a problem of heating and heaters. The author reviews at length the principles embodied in and the construction of the heated vaporizers or vaporizing heaters now used in stationary and traction kerosene engines and in alcohol engines, giving illustrations of a number of such devices. After thus developing what in his opinion are desirable and good principles, the author describes a form of vaporizer embodying such principles, which he states has had successful trials (both block and road) in automobile service.